Take Care of Your Equipment and It Will Take Care of You

November 11, 2004
/ Print / Reprints /
ShareMore
/ Text Size+
Truckmount? Portable? Both work wonders when operated by experts


One of the most common questions that appear on the industry Bulletin Boards seems to be "Which brand of machine is best?" The next most common is, "Which is better, a portable or a truckmount?"

The reality is, they are just tools, and any determination of which is the "best" often comes down to the knowledge and ambition of the operator. Due to their relative simplicity portables require less maintenance than truckmounts, but none of these tools are self-maintaining. During my time in the military, we were required to keep a maintenance log on each and every piece of equipment assigned to us. You can and should do the same with all equipment in your care. Regardless of the system you select, it is imperative to establish a regular maintenance schedule for it.

The place to start is with the owner's manual. Most will make definite recommendations as to the frequency of lubrication and filter checking, and some will come with a maintenance chart mounted near the control panel of the unit. It's actually quite easy to construct a maintenance log. The primary tasks in truckmount maintenance include lubrication, filter cleaning and keeping the cooling system full. And don't forget to keep the engine fuel tank topped off as well; it can be pretty embarrassing to run out of gas or burner fuel in the middle of a job. Fuel and coolant checking should be done daily.

The lubricating oil in the primary engine must be changed regularly if you want to get the maximum life out of the engine. I have a friend that got about 7,000 hours from a 16-hp Briggs & Stratton engine. In his case, the oil and filter were serviced about every 90 days. He was also in the habit of checking and topping off the oil daily. He also checked and topped off the coolant level on the van engine on a daily basis.

Filters must also be checked at least daily. There will generally be at least two filters in the recovery. One, usually a mesh bag, will be located at the point where the vacuum hose enters the recovery tank. It is designed to catch the gross debris recovered from the carpet being cleaned. Check these filter bags during the workday since, if they get clogged, you may suffer a loss of recovery ability in the machine, which may contribute to slow drying. There will also generally be a fine mesh screen that protects the vacuum pump/blower from smaller particles that may pass through the filter bag. Since these filters may be located deep within the recovery tank, and may therefore be difficult to clean, some cleaners will place a nylon stocking over the screen so cleaning the screen becomes more a matter of removing the stocking for cleaning and replacement.

Some cleaners opt to use an external filter, which fits between two sections of the vacuum hose and may be easier to clean that the filters in the recovery tank. One type of external filter is made of clear plastic, designed to allow the customer to see the soil being removed from the carpet; this can be a pretty powerful sales tool for your customer or their neighbors.

The primary maintenance required in the water-heating system is the de-scaling of the heater to remove hard-water and detergent residues that build up in the heater coil and reduce your heating capability. De-scaling products should be available from your regular supplier. If you are using soft water, you may not find as much scale in your heater.

Twenty years of cleaning in Florida with a truckmount has instilled in me the habit of performing a "lizard check" before connecting the water feed hose, also known as the garden hose, to the unit. This consists of running a couple gallons of water through the hose to dislodge creatures such as lizards and bugs from the hose, especially when using the customer's garden hose. The lizard check prevents the necessity of dismantling the incoming water system to remove debris of any kind.

A simple policy of checking of fluid levels and filter content daily should keep you in hot water (if you are using a hot-water extraction system, that is). Until next month, think clean!

Did you enjoy this article? Click here to subscribe to i Cleaning Specialist Magazine.

Recent Articles by Bob Wittkamp

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

The 2014 Experience Conference and Exhibition

A look in photos at the 2014 Experience Conference and Exhibition, which was held from April 24-26 at the Embassy Suites Convention Center and Spa in Frisco, Texas.

1/27/15 2:00 pm EST

Grow Your Business and Improve Operations with New Payment Technology

Attend this free webinar to learn how new developments in payment technology can help you close more jobs, increase upselling opportunities and improve operations.

Podcasts

The winter slow season is a great time to pursue commercial cleaning accounts and stay busy. John "the Hitman" Braun solicited questions from thousands of cleaners across the country regarding their questions on commercial cleaning accounts and answers them in this episode of the show.
More Podcasts

ICS Cleaning Specialist Magazine

CoverImage

2014 Nov/Dec

The Nov/Dec ICS features content on how to get better meter readings, a roundtable on truckmount development, neighborhood marketing and more. Also included is the annual Buyer’s Guide and Directory.

Table Of Contents Subscribe

Janitorial Work

In addition to residential and commercial carpet cleaning, do you do any janitorial work on the side?
View Results Poll Archive

THE ICS STORE

FinalCover.gif
The Carpet Cleaner's Book of Unlimited Success! (ebook)

Don’t worry about the recession or about your competition.  Now you can be the owner of over 400 ways for carpet cleaning professionals to make more money and get more jobs!

More Products

ICS DIRECTORY AND BUYING GUIDE

Director_Buyer.jpgThe premier resource and reference guide for the cleaning and restoration industries.

Click here to view

STAY CONNECTED

facebook_40.png twitter_40px.png youtube_40px.pngcrc logo

TRUCKMOUNT EQUIPMENT AND ACCESSORIES GUIDE

Truckmount.jpgEquipment listings and specifications from the leading industry manufacturers.

Click here to view