In the Market for a New Wand? Here's What to Look For

November 6, 2001
/ Print / Reprints /
/ Text Size+
If you're in the market for a new wand for your in-plant facility or your truckmount, then here's some information on what to look for.

In the market for a new wand?

Here's what to look for, and how they work

Types of Wands:
3-jet Double Bend
These incorporate a 10-inch double bend design with a slanted head. The 3-1/4-inch height allows the wand to reach and extend easily under furniture and beds. These wands usually have three stainless steel jets mounted on a manifold.

12-inch single bend design wands with single jet.

14- and 18-inch wands. These are the same height as 3-jet wands, but with five jets. These wands are ideal for commercial grade carpet only. The head size improves productivity.

Weighted 'Drag' wands are usually 12-inches, and have wheels making wand stroking obsolete. However, while easier on the shoulders/arms, weighted drag wands also make agitation (see below) obsolete. These are an early design back in the 'early days' of hot water extraction (HWE cleaning).

RX-20 is a mechanical floor tool using rotary extraction action. It maximizes wand agitation to the greatest extent, and is excellent for commercial use. This wand requires high heat and maximum water flow (200 degrees Fahrenheit and higher; 500 psi minimum). However, it's too cumbersome for residential use, making the Roto-vac, which is lighter and smaller, the ideal residential version.

Upholstery tools (4-inches wide and head-adjustable) allow the user to control water flow volume for delicates, and a vacuum reduction valve, also for delicates.

Some terminology:
Wand agitation - This occurs as the wand shoe passes back and forth over the pile. The 'fluttering' of fibers when acted upon by vacuum airflow when a proper, multiple-pass wand stroking technique is used enhances the agitation. Proper agitation, which allows for dwell time/and maximum soil suspension, cannot be achieved this way as this action occurs too late in the cleaning sequence.

Double stroking - Used on preconditioned areas with heavy soiling. Double stroking incorporates a double rinse process.

Chop Stroking - Also known as 'flood and flush' technique, chop stroking is used in extreme, ground in soiling situations (entry areas). With trigger spray valve open, the wand is pushed forward over the carpet to an extended distance. The forward stroke is reversed and with the spray valve still open, the wand is pulled back six inches and then pushed forward three inches and so on-back. This is continued in rapid succession until the wand has returned to the starting point.

Parallel Stroking - Basic spray forward, spray and extract backward. With spray off, vacuum overlap and repeat sequence in a parallel pattern.

Did you enjoy this article? Click here to subscribe to i Cleaning Specialist Magazine.

You must login or register in order to post a comment.



Image Galleries

The 2014 Experience Conference and Exhibition

A look in photos at the 2014 Experience Conference and Exhibition, which was held from April 24-26 at the Embassy Suites Convention Center and Spa in Frisco, Texas.


Have a limited marketing budget but realize the importance of neighborhood marketing? Try doorknob hangers, a low-cost, yet highly effective way to drum up more business. In this episode, John Braun discusses the value of this tactic as well as what you should include on the materials you're hanging.
More Podcasts

ICS Cleaning Specialist Magazine


2014 September

The September issue of ICS features stories on moisture detection, disinfectant services, neighborhood marketing, then we discuss the last level of being phenomenal, and cool products.

Table Of Contents Subscribe

Social Media

Social media is a good way to regularly keep in touch and interact with current clients and reach potential ones. What social mediums do you use in your cleaning/restoration business?
View Results Poll Archive


Get Paid! book cover
Get Paid! (ebook)
Over 30 authors – over 40 articles…from attorneys, contractors, consultants, instructors and others, both inside and outside the restoration industry. R & R, C & R and Cleanfax, opened their archives and gave us the best they had, other chapters were created just for the “Get Paid!” book and its readers. And every one of them has ideas for how to get paid what you are owed.

More Products


Director_Buyer.jpgThe premier resource and reference guide for the cleaning and restoration industries.

Click here to view


Truckmount.jpgEquipment listings and specifications from the leading industry manufacturers.

Click here to view


facebook_40.png twitter_40px.png youtube_40px.pngcrc logo