So you've taken the RRP training, and you've become a Certified Renovator. Now you give out the Renovate Right pamphlet to clients, occupants and/or parents before every remodel job on an old building. So you're safe, right?
So you’ve taken the RRP training, and you’ve become a
Certified Renovator. Now you give
out the Renovate Right pamphlet to clients, occupants, and/or parents before
every remodel job on an old building.
You put up containment, train your employees, use lead-safe work
practices, and clean the job site within an inch of its life. You do cleaning verifications, or
better yet, clearance exams.
So you’re safe, right?
Safe from EPA audits, safe from litigation, safe from outrageous fines
and penalties?
Not quite. As you may have heard before, “The job isn’t over
until the paperwork is done.”
One section of Renovate, Repair, and Painting (RRP) training
dealt with record keeping. But
many Certified Renovators admit that they’re more confused about what records
they have to keep after the training than they were going in. And since your trainer may not have had
the time to get into the nitty-gritty details of documentation, you may not
have gotten a clear idea what you have to document. (I heard one RRP instructor say, “go home, read the law, and
spend about 40 hours figuring out how to create a record keeping system.”
Clearly, not very helpful.)
But make no mistake about it. Record keeping is a very important part of the RRP process.
The EPA probably isn’t going to swoop down on your job site at the exact time
that you happen to be disturbing lead-based paint. No, it’s much more likely that they’ll contact you and ask
you for your records pertaining to that job you did on Oak Street back in
November of last year. “Oh, and
while you’re at it, could you please send us all your records from all the
other jobs that you did on pre-1978 houses, dwellings, and child-occupied
facilities.”
And in a court of law, the lawyer certainly isn’t going to
take your word for it that you put up containment, or used a HEPA vacuum, or
cleaned the floor well enough that you could eat off it. You’ll need some kind of proof that you
followed lead-safe work practices. (However, if the lawyers discover that you
used lead-safe practices and have adequate records, they’re more likely to look
elsewhere for the source of their client’s lead poisoning.)
We’ll try to clarify your responsibilities and give you
guidelines for the records that you need to keep to comply with the RRP Rule.
Record Keeping 101
If you already have a “job book” for each project, or have
some other record keeping system that helps you document each project, then you
can probably skip to the next section. But if keeping detailed records isn’t
your strong suit, here are some tips.
Set up some kind of system. You need to create an organization scheme. It could be 3-ring binders, or
different colored file folders, or electronic files-some system that forces you
to keep your records organized.
(And while a shoebox might work well for filing receipts from the
hardware store, you’ll need to be a little more systematic when it comes to RRP
records.)
Decide when you’re going to document your work. It could be at the start of each day
while you’re drinking your coffee.
Or, you could record everything each Thursday evening. But decide what’s most convenient for
you, at a time when something else isn’t going to get in the way. Then commit do keeping your paperwork
up-to-date. It’s a lot easier to
document your work while it’s fresh in your mind than it is to try to remember
what happened on a job you did 3 weeks ago.
Most importantly, stay with it. Record keeping is a skill that gets
easier over time. And the more
convenient your system is to use, the easier it will be to stick with it. If you need to, create a checklist of
the records you need to keep. Then
refer to the checklist on a regular basis to make sure you’ve covered all the
bases
What You Need to Document
First, a word about OSHA. OSHA has had regulations in place for 20 years regarding
work that disturbs lead-based paint.
These regulations include the process for determining how much lead your
employees will be exposed to during the course of their work, and procedures
for protecting the workers. There
are records that you are required to keep, such as documenting your respirator
program and your medical program.
The RRP Rule does not have these requirements. But that doesn’t excuse you from
adhering to OSHA’s regulations and record keeping requirements. In fact, as a result of the RRP
program, OSHA is more apt to catch you for violating lead work procedures.
The RRP Rule only requires that you keep records on
dwellings and child-occupied facilities that were built before 1978. If you test for lead-based paint and
discover that none is present (or, that the lead-based paint won’t be disturbed
by your remodeling or painting project) an abbreviated set of records are
required.
The EPA requires that you keep the following seven different
pieces of information on each project.
This information follows the general progression of a “lead job”:
- Assign a Certified Renovator
- Educate the client (or occupant, or parent)
- Test for lead-based paint
- Train your workers
- Work safely
- Clean up thoroughly
- Report to the client
- Assign a Certified Renovator
A Certified Renovator must be assigned to each project that
involves a pre-1978 dwelling or child-occupied facility. You have to keep a copy of the
Certified Renovator’s certificate (as well as the Certified Firm’s certificate)
on the job site for the duration of the activities that disturb lead-based
paint.
You should also keep a copy of the Certified Renovator’s
certificate in your records.
There’s always a chance that the Certified Renovator isn’t going to work
for you two years from now when the EPA comes calling. And while the EPA has a database of all
Certified Renovators, it will be a lot more convenient if you have their
certification number on file.
Educate the Client
The EPA wants to make sure that the public is informed about
the dangers of lead-based paint that could arise from the renovation activity.
They’re paying special attention right now to whether you’re “educating” your clients
by giving them the pamphlet, The Lead-Safe Certified Guide to Renovate
Right. When you give the client,
or occupant, or parent (if you’re working in a Child-Occupied Facility), the
pamphlet, make sure you get some form of proof that you gave them the pamphlet.
Depending on the type of building you’re working on, the EPA
has different requirements for who needs to be notified, and how you can notify
them. Refer to the chart,
Requirements and Options for Pre-Renovation Notification, for a summary of the
EPA’s requirements.
There are only two ways to notify an owner-whether that’s
the owner of the house where you’re working, or the owner of the building. You can hand deliver the pamphlet (and
therefore get a “live” signature) or mail the pamphlet to them. If you hand
deliver the pamphlet, you can give it to them anytime (up to 60 days) before
the work starts.
If you mail the pamphlet, it has to be mailed at least 7
days (but no more than 60 days) in advance. You have to send the pamphlet certified mail, with a return
receipt requested. Either way, the
owner has to get the pamphlet prior to the start of your work.
If you’re working inside someone’s dwelling, but they’re not
the client (for instance, if the building landlord has commissioned the work) you
still must deliver a copy of the Renovate Right pamphlet to each occupant. But if you’re not able to get a
signature from each occupant you have to document how you delivered the
pamphlet and why the signature wasn’t obtained.
If you’re doing work in a “common area” of a building (for
example, if you’re working in the laundry room of an apartment complex), you
have to notify the building occupants of the upcoming renovation activity. You don’t have to give each occupant a
pamphlet, but you need to make them aware of the scope of the renovation
activities and you have to make free copies of the pamphlet available to them
upon request. You can do this by
hand-delivering notifications, by mailing them, or by posting signs in places
where the occupants will be sure to see them.
If the scope of your project (i.e., the activities that
disturb lead-based paint) changes, you need to re-notify everyone of the
changes. So if the start date, or
the end date, or the scope of the project changes, remember to send a notice of
the change, or change the information on the posted signs.
If you’re working in a Child-Occupied Facility, the
notification procedures mimic those of work in a common area. You have to deliver pamphlets to the
building owner and an adult representative of the facility. Then you have to notify the parents and
guardians of all the children who are affected by the renovation.
In each case there are nuances regarding how the
notification takes place. So
document everything-how you delivered the pamphlets, when you delivered the
pamphlets, who delivered them, why you didn’t receive signatures, etc. The Certified Renovator is responsible
for this notification process, so he or she should sign any documentation that
is generated.
Test for Lead-Based Paint
You need to document the lead testing product that you
use. Different manufacturers
provide different information (and call it different things). The Test Kit
Documentation Form that you received in your RRP training class may or may not
reflect the information of the test kit you use.
As you test each component that you will disturb, you’ll
need to document the results.
Identify the test kit from which the test swab or bottle came and the
results of the test. Of course,
you may choose to presume that lead is present on one or more components, and
proceed accordingly. You’ll need
to document that as well.
In some cases (like HUD projects) you’ll need to have a
certified agency test for lead. In
that case, you’ll need to record the information about the agency, including
their certification number.
They’ll give you a report of their results, and you need to store the
report with your files.
If you test, and discover that no lead is present on any of
the components you’re going to disturb, you don’t have to keep any other
records. Bundle up all the
documentation that you’ve created to this point, and store it away.
Train Your Workers
Your workers are key to your lead-safe work. The RRP Rule doesn’t require that they
take the RRP training class (unless you’re working on a HUD job, in which case
they may need to be trained). But
the Rule requires that they receive training from a Certified Renovator. The Certified Renovator has to record
all of the skills each worker is trained to perform.
Work Safely
From setting up containment to cleaning up the job site
after the lead-disturbing activities have been completed, you have to ensure
that proper work procedures are followed.
When you document your project, note the work practices that you performed,
and write a brief description of what you did to ensure clean, safe practices.
The Certified Renovator is responsible for this
documentation, so s/he needs to sign the form when it’s complete. Some Certified Renovators go the extra
step to have the client sign the form as well. This provides proof that the client concurs that lead-safe
work practices were used.
Cleaning Verification
The Certified Renovator is required to conduct a Cleaning
Verification (on interior jobs) to ensure that no debris or lead dust has been
left behind. You perform the test
using:
- One wet cloth per window sill
- One wet cloth per 40 sq. ft. of horizontal surface
(countertops, book cases, etc.)
- One wet cloth per 40 sq. ft. of floor
Document each area that you test. If you fail the cleaning verification in one area, but not
others, you will need to re-clean that area, re-test that area, and document
that you passed the verification the second time. The Certified Renovator should sign the form, and you may
choose to have the client sign the form as well.
Under certain circumstances (for example, on HUD jobs)
you’ll need to have a certified agency perform a clearance exam. Record the information about the
agency, including the firm’s certificate number, and keep a record of the
report that they provide.
Report to the Client
The EPA has added reporting requirements to the RRP
Rule. You are now required to give
certain documentation to the client.
This “final report” has to be delivered to the client at the time that you
present the final invoice, or within 30 days of the completion of the project
(whichever comes first).
If you’ve been keeping up with your record keeping, it won’t
be hard to compile this final report.
Just make copies of the documents you’ve already completed. The report should include, at a
minimum:
- Results of the test for lead-based
paint
- Documentation of the training of non-certified
workers
- Documentation of the lead-safe work practices you
used
- Results of the cleaning verification or clearance
exam
If your project was in the common area of a multi-family
dwelling, or in a Child-Occupied Facility, you must also make the final report
available, upon request, to any occupant or parent/guardian.
Final Thoughts
Your digital camera is going to become your best
friend. Take photos of anything
that documents your compliance with the RRP rule. Photograph your barriers and your containment area. Photograph your work practices, and of
your workers in personal protective equipment. It’s impractical to keep you lead test kits, or the cleaning
wipes you used in the cleaning verification. Take photos of those items and label them. (A small dry erase board is very
effective in captioning photos.
Write the specifics of the photo on the dry erase board and place it in
the shot.)
If you tackle an emergency repair project, you are excluded
from most of the RRP processes. You must clean up the site and perform a
cleaning verification. And you
must keep records-information about the project location, the nature of the
emergency, and the RRP processes that you didn’t perform.
You are required to maintain your records for three years,
and you have to be able to produce the records upon request. So along with the record keeping system
you create, set up a storage system as well. Label projects so that you can find them easily. It will pay to put a little thought
into the system now, so that you’ll be able to rotate out the “expired”
projects 3 years from now.
In the final analysis, the system that you use doesn’t
matter as much as using a system.
You can create a system of your own, or you can avoid the time and the
headache by using a system that someone else has created. What’s most important is that you use
some system, or you’ll get buried under the additional paperwork that the new
law has created.
The EPA has said, in no uncertain terms, that your records
(or lack thereof) are the “low-hanging fruit.” In a time of governmental budget cuts travel will be
curtailed, your records will be the primary way that the EPA determines your
compliance with the RRP Rule. Make
sure you’re ready when they ask for your records.